Customizability Water Treatment Equipment - Electromagnetic Flowmeter
1 . Descriptions:
Electromagnetic induction pull-flow meters consist of a sensor and an intelligent signal converter. It can measure the volume flow of various types of conductive liquids, the measured media include acid, alkali, salt and other strong corrosive liquids and pulp, slurry, slurry, waste water, seawater and solid-liquid two-phase liquids, mainly used in petrochemicals, iron and steel, electric power, metallurgy, textiles, food, pharmaceuticals, papermaking and other industries and municipal environmental protection, water conservancy and other fields.
2 . Product parameters:
| Maximum flow rate | 15m/s |
| Fluid conductivity | ≥5㎲/cm |
| Accuracy Class | 示值的±0.2%,示值的±0.5% |
| Nominal diameter (mm) | 3,6,10,15,20,25,32,40,50,65,80,100,125,150,200,250,300,350,400,450,500,600,700,800,900,1000,1200,1400,1600,1800,2000,2200,2400,2600,2800,3000 |
| Nominal pressure | 10.0MPa,6.3MPa,4.0MPa,2.5MPa,1.6MPa,1.0MPa,0.6MPa |
| Ambient temperature | Transducers | -25℃~+60℃ |
| Converters and All-in-Ones | -10℃~+60℃ |
| Lining material | Neoprene, PTFE, polyurethane rubber, polyperfluoroethylene propylene, PFA, ceramics, etc. |
| Signal electrode type | Fixed, Scraper, Removable |
| Connection flange material | Carbon steel, stainless steel (304, 316, 316L) |
| Transmission distance | Split electromagnetic flowmeter, sensor and converter connected with signal cable, the cable length should be less than 100m longest |
| Power consumption | <20W |
| ※parameter and detail are customizable to clients' demands. |
3 . Specificities:
1. High precision, good stability, not affected by the measured liquid temperature, pressure, density, viscosity and conductivity changes.
2. Simple structure of the sensor, no throttling device, no blockage.
3. There are a variety of options for receiving liquid material, can be used for a variety of corrosive liquid measurement.
4. Wide measurement range, low power consumption, less than 7W.
5. Measuring unit and decimal point are automatically converted.
6. One key to restore the factory parameter settings.
4 . Appliance:
1. Drinking water supply: Used for water flow monitoring in waterworks to ensure the quantity and quality of water supply.
2. Wastewater treatment: Used in wastewater treatment plants for inlet and outlet water flow monitoring, to help optimize the treatment process and ensure that the discharge meets the standards.
3. Liquid chemical transportation: used to monitor the flow of various chemical liquids, to ensure the precise control and safe operation of the chemical production process.
4. Corrosive liquid measurement: Since the electromagnetic flowmeter has no movable parts, it is very suitable for measuring corrosive liquids, such as acid and alkali.
5. Cleaning process monitoring:Used to monitor the flow of cleaning liquid in production equipment to ensure the cleaning effect.
|
|
Customizability Water Treatment Equipment - Electromagnetic Flowmeter Images
|
